2000W Inverter MPPT Grid Tie Inverter for Battery/Solar – Jag35
4.8 (95) · € 203.00 · En Stock
Please read the description carefully. This product is linked to a 3rd party affiliate. 2000w Standard Solar Power Grid Tie Inverter with Limiter sensor/clamp Limiting 2kw Grid Tie Inverter, 45-90VDC, AC 220V 240V, LCD With Limiter-in Inverter - DC 45V-90V- AC 220V 230V 240V (auto selected )- Internal Power Limiter
Please read the description carefully. This product is linked to a 3rd party affiliate.
2000w Standard Solar Power Grid Tie Inverter with Limiter sensor/clamp
Limiting 2kw Grid Tie Inverter, 45-90VDC, AC 220V 240V, LCD With Limiter-in Inverter
- DC 45V-90V- AC 220V 230V 240V (auto selected )- Internal Power Limiter built-in- With Battery Discharge Function / Voltage Adjustable -Wi-Fi port (optional)- Limiter sensor and clamp included (2 meter cable )
A product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are reduced to insignificant levels, if not eliminated --- because in some countries, the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if power is exported to the grid, thus the consumers will be charged for power even if it is given to the grid, and this is the problem.
With the 2nd generation GTIL, we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed, reduced customer’s cost, more easier for installation.But in case customer install inverter far away from the main circuit breaker, we also enable the 2nd GTIL work with stand-alone limiter, we call this-external limiter.For sure, the inverter can work under normal Grid tie-no limit mode, just set on the nice LCD and save your setting.
New upgraded firmware enable battery or solar limiter current and power model
User can set the maximum output power of inverter , this can make the inverter work at cooler condition as user want and extend the lifespan of the inverter .
User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .
Technical Data
Continuous Power Output
1950W
Peak Power Output
2000W
Input DC Voltage Range
45V ~ 90V
Peak power tracking voltage
50V-90V
AC Output Voltage Range
190VAC ~ 260VAC
Output Frequency
46Hz~65Hz
Standby Power Consumption
<0.5W
Total Harmonic Distortion
<5%
Peak Inverter Efficiency
92%
MPPT Efficiency
99%
Power Factor
0.99
Output Wave Form
Pure Sine Wave
MPPT Function
Yes
Over Current Protection
Yes
Over Temperature Protection
Yes
Reverse Polarity Protection
Yes
Anti-Island Protection
Yes
Stackable
Yes
Weight ( Kg)
6kg
Dimensions (W x H x D)
434x196x88 mm
a: DC input, for solar panels connection
b: Connector for external limiter
c: Connector for internal limiter
d: AC output, use AC cable to connect to home grid
1. Using Grid Tie Inverter With Limiter Model
2. Installation of GTIL With Internal Limiter
2.1) The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.
2.2) The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time.
2.3) The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically.
3.1) This installation is not require an additional limiter module,Installation is much easier.Clamp the current sensor cable to the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.
3.2) External protective device including dc and ac SPD(Surge protection device),dc and ac breaker,etc is recommended to installed in the system.
4. Limiter Setting on the LCD of the inverter:
The GTIL include three working mode:Work as normal GTI without power limitation.Work under Internal limiter mode and Work under External limiter mode,Pls make your setting on the LCD and save it,details setting operation,pls read the GTI manual.
5. Battery Discharge Power Mode
New upgraded firmware enable battery or solar limiter current and power model.
User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter .
User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .
6. Limiter Module Specification
1. Clamp sensor- Max 100A
2. Wattmeter- Max 9999w
3. Terminal Block-Max 20A
4. Receptacle- max 2000w
5. Clamp sensor signal- 5v AC max mA
6. DC signal Cable- 5v DC, max mA
If the distance of meter and inverter is too long , you will need the External Limiter.Note: The external limiter is not included in package
VEVOR Grid Tie Solar Inverter 1000-Watt MPPT Power Inverter 50/60 Hz DC10.8 to 30-Volt AC90 to140-Volt for Solar Panel System
VEVOR Grid Tie Solar Inverter 1000-Watt MPPT Power Converter DC20 to 45-Volt to AC90 to 140-Volt for Solar Panel System Provides up to 1000 -Watt for tailgating and tools Thermally controlled cooling fan prevents overheating Ideal for job sites, home standby, and recreation applications 1000-Watt Grid Tie Solar Inverter. A smart grid-tie inverter is a compact unit, which directly converts direct current into alternating current for powering appliances and connecting to the utility grid.
VEVOR Grid Tie Solar Inverter 1000-Watt MPPT Power Converter DC20 to 45-Volt to AC90 to 140-Volt for Solar Panel System
【2000W Solar Hybrid Inverter】This 2000W pure sine wave inverter is a new all-in-one hybrid solar charge inverter, which integrates solar energy
PowMr 2000W Solar Inverter 12V DC to 220-230V AC, Pure Sine Wave Hybrid Inverter with 80A MPPT Solar Charge Controller, Work for 12V
Marsrock 2000W PV Grid Tie Inverter Power Limiter Wide Voltage 45-90VDC for Solar Panel Input AC185-265V (2000W48V240) Blue : Patio, Lawn & Garden
2000W Inverter MPPT Grid Tie Inverter for Battery/Solar – Jag35
PowMr 2000W Solar Inverter 12V DC to 220-230V AC, Pure Sine Wave Hybrid Inverter with 80A MPPT Solar Charge Controller, Work for 12V LiFePO4/Li/GEL/AGM Battery : Patio, Lawn & Garden
2000w Mppt Solar Power On Grid Tie Inverter With Limiter 45-90vdc Ac 220v 230v 240v - Inverters & Converters - AliExpress
【2000W Solar Hybrid Inverter】This 2000W pure sine wave inverter is a new all-in-one hybrid solar charge inverter, which integrates solar energy
PowMr 2000W Solar Inverter 12V DC to 220-230V AC, Pure Sine Wave Hybrid Inverter with 80A MPPT Solar Charge Controller, Work for 12V
2000w Mppt Solar Power On Grid Tie Inverter With Limiter 45-90vdc Ac 220v 230v 240v - Inverters & Converters - AliExpress
Marsrock 2000W PV Grid Tie Inverter Power Limiter Wide Voltage 45-90VDC for Solar Panel Input AC185-265V (2000W48V240) Blue : Patio, Lawn & Garden
This product is linked to a 3rd party affiliate. Cheap Grid Tie Inverter Y&H 1000W Grid Tie Inverter Stackable MPPT Pure Sine Wave DC20-45V
Y&H 1000W Grid Tie Inverter Stackable MPPT Pure Sine Wave for Solar
2000W MPPT Solar Grid Tie Inverter for solar panle or Battery Discharge 2KW solar inverter DC 45-90V 60-110V to AC 220V230V240V
