STL file Playseat Challenge Mount for Logitech Driving Force
4.6 (538) · € 28.50 · En Stock
This model is two parts and is held together by two M6 socket head cap screws and two nuts (Bolt length minimum 40mm). I suggest installing grip tape on the flat surfaces for a secure hold. I also recommend adding one wrap of grip tape to the circumference of the tubing frame of the chair to ensure your mount doesn’t rotate when you shift into reverse. This is printed from PLA filament and only requires a 20% infill for structural integrity. This mount will not rotate or flex under shifting load. Downloadable STL files include RIGHT and LEFT handed shifter/stick mount. Please ensure you print the one for your needs. I included a shorter file for smaller capacity printers (20cm max height) which will still fit the shifter mounts.
Playseat Challenge Mount for Logitech Shifter - Israel
Ultra-portable Playseat Challenge X – Logitech G Edition sim
This is my mount for a Logitech driving force shifter on a Playseat Challenge. It mounts everything far away from the opening mechanism (mounted on
Shifter+Ebrake Mount for Playseat Challenge
3D Printed Playseat Challenge Bracing : r/simracing
Ultra-portable Playseat Challenge X – Logitech G Edition sim
▷ playseat challenge shifter mount 3d models 【 STLFinder 】
3D Printed Playseat Challenge Bracing : r/simracing
Playseat Challenge Shifter Mount, M6 Hardware por frez_knee
For Playseat Challenger Seat Th8a/ G27/G29 Shifter Gear Lever
)
