Accueil
tormek
Tormek T-8 Sharpening System Rockler Woodworking and Hardware

Tormek T-8 Sharpening System Rockler Woodworking and Hardware

4.6 (640) · € 28.99 · En Stock

Tormeks T-8 10 Sharpening System can sharpen virtually any knife or edged tool, including knives, scissors, axes, chisels, plane irons, drill bits and more. Aluminum-oxide grindstone sits over a large water trough that can be raised and lowered, so you can minimize splashing. Thanks to the water-cooling system and slow running speed, you maintain complete control over the edge without risking the steels temper.

Tormek T-8 Sharpening System

The MH-380 Machine Cover protects your machine from shavings and wood dust and fits all Tormek models. The machine cover is made of 100% cotton. This is a breathable material so that no moisture is trapped.

Tormek MH-380 Machine Cover

Tormek T-8 Sharpening System

Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting

Multi-Jig SVS-50 for Tormek Sharpening Systems

Tormek T8 Setup

Tormek T-4 Sharpening System Rockler Woodworking and Hardware

Tormek Centering Knife Jig - Rockler Knife sharpening jig, Knife grinding jig, Tormek

Tormek T-4 Sharpening System Rockler Woodworking and Hardware

Tormek SVD-110 Tool Rest with Torlock is used for turning scrapers, hollowing tools and thin parting tools. It can also be used for cabinet scrapers, screw drivers and spoke shave blades. It features a fast and secure locking on the Universal Support due to the patented wedge shaped design, which increases the locking force by 250 percent. It has a generous surface, 3-1/2-inch x 4-1/2-inch, which permits a safe and steady positioning of the tool towards the stone.

Tormek svd-110 Tool Rest

Water cooled sharpening with no risk of overheating the steel and exact replication – sharpen your tools with unbeatable precision. Includes: SG-250

Tormek T-8 Original – Water Cooled Sharpening System for Edge Tools – US Version – English Handbook

For use on the lower bed when the lathe's sliding bed is extended for turning spindles. This second tool rest (with height extender) along with the other supplied base on the sliding bed, permits turning along a full 40 In. long spindle by switching gouges between the two rests. Includes base assembly only, without tool rest or tool rest height extension.

Rikon 82-100 8 Wet Sharpener

The jig 1 comprises an upper base with a lower clamp and two locking knobs for fixing the tool. The jig slides on the Universal Support on nylon bushings across the grindstone. The edge angle is set with the Micro Adjust 4 on the Universal Support 5. There are two safety stops to prevent the tool from slipping off the stone when grinding. One inner stop 2 to be positioned according to the width of the tool and one outer stop 3 mounted on the end of the Universal Support.