Tormek T-4 Sharpening System Rockler Woodworking and Hardware
4.9 (77) · € 20.99 · En Stock
Tormek TNT-808 Woodturner's Kit - A Complete Turning
Tormek T-7 Sharpening System Review
Learn Woodworking Tips with Rockler
Tormek T-4 Sharpening System Rockler Woodworking and Hardware
Water-Cooled Sharpening system for Wood Chisels, Plane Irons, Spoke Shaves, Carving Tools, Lathe Turning Tools, Knives, Axes, and most edge tools.
Tormek T-4 Original - Compact Water Cooled Sharpening System for Knives and Edge Tools - US Version - English Handbook
Tormek T-4 Original - Tormek
With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape. The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed.
Tormek Square Edge Jig
Tormek T-4 Original - Compact Water Cooled Sharpening
Tormek® SVM-00 Small Knife Sharpening Jig
Tormek SVD-110 Tool Rest with Torlock is used for turning scrapers, hollowing tools and thin parting tools. It can also be used for cabinet scrapers, screw drivers and spoke shave blades. It features a fast and secure locking on the Universal Support due to the patented wedge shaped design, which increases the locking force by 250 percent. It has a generous surface, 3-1/2-inch x 4-1/2-inch, which permits a safe and steady positioning of the tool towards the stone.
Tormek svd-110 Tool Rest
Tormek T-4 Bushcraft – Water Cooled Sharpening System for
Planer/Joiner Blade Jig (SVH-320) - Tormek Sharpening System
The jig 1 comprises an upper base with a lower clamp and two locking knobs for fixing the tool. The jig slides on the Universal Support on nylon bushings across the grindstone. The edge angle is set with the Micro Adjust 4 on the Universal Support 5. There are two safety stops to prevent the tool from slipping off the stone when grinding. One inner stop 2 to be positioned according to the width of the tool and one outer stop 3 mounted on the end of the Universal Support.
Tormek Axe Jig
